250 CR 1974

Di seguito tutti i dettagli di questo restauro.

Descrizione:

This is the 250 CR production with engine and chassis entirely VILLA. Unlike the previous model to this, we have the part of the frame that comes down from the saddle and engages the fork tube crushed; the former presents instead a round tube. This model also presents the shock very inclined. The previous model keeps the focus at the same point of the swingarm, but snaps near the saddle showing less inclination. The fuel tank and side covers are painted in green or red VILLA with the strip in white RAL 9010. The frame is spray painted in metallic gray-green wheels for the version with tank; semi-gloss black powder for red tank. In this year the bike was produced with low exhaust muffler and its production with low discharge will continue for a good part to the year 1975. The bike is owned by Mr. Gerardo Marino Altamura -Bari- and is the largest of collezzionista motoVILLA in southern Italy. The bike has been restored by CorrĂ  Maurizio and the engine prepared by Mr. Villa Francesco.


Dettagli tecnici:

Frame: Double cradle steel Ni Cr
Engine: Single cylinder 2 stroke
Bore: 70 mm
Stroke: 64 mm
Displacement: 246.2 cc
Lubrication: Mix 5%
Carburetor: BING 54 speakers from 34 mm
Ignition: Electronic MOTOPLAT
Transmission: 5-speed
Clutch: oil bath
Fork: Ceriani D. 35
Shock: Marzocchi
Front wheel hub CAMPAGNOLO D. 150
Rear wheel hub CAMPAGNOLO D. 150
Front tire .: 3.00 x 21
Pneumatic post .: 4.50 x 18
Reservoir: In iron
Front fender .: Preston Mudder white
Fender post .: Bertolani white